Follow Us on LinkedIn Follow Us on YouTube

  1. CLC 16-320

    High strength. A two part, five minute epoxy with high strength for quick repair applications. CLC 16-320

  2. CLC 16-600

    RT Cure, 5 Minute adhesive. Clear when cured, good for quick repairs. CLC 16-600

  3. CLR 1066 / CLH 6930

    Large mass casting, 30-minute pot life. Masses larger than 6Lbs. A two component, filled, room temperature cure epoxy system.the product has a low exotherm and low shrinkage, making it suitable for castings larger than 3 kgs. CLR 1066 / CLH 6930

  4. CLR 1180 / CLH 6020

    A low viscosity, two component, unfilled, room temperature cure, epoxy system. This system provides resiliency and strength making it suitable for a variety of applications. ie. adhesives, castings, coatings and tooling. CLR 1180 / CLH 6020

  5. CLR 1180 / CLH 6560

    Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560

  6. CLR 1180 / CLH 6930

    Room temp cure, excellent shock resistance. An exceptional epoxy laminating system with excellent thermal and mechanical shock resistance. Product is suitable for a variety of applications. CLR 1180 / CLH 6930

  7. CLR 1183 / CLH 6560

    Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560

  8. CLR 1190 / CLH 6025

    General purpose variable substrate adhesive. A medium viscosity, unfilled casting system. It is suitable for large mass castings and exhibits good impact resistance. CLR 1190 / CLH 6025

  9. CLR 1190 / CLH 6372

    Solvent resistant. Good Adhesive. A room temperature cure casting system with excellent chemical resistance. When properly post cured, the product is suited for operation at elevated temperatures. CLR 1190 / CLH 6372

  10. CLR 1190 / CLH 6830

    5 min. gel general purpose adhesive. A two component, five minute epoxy system with optical clarity and high strength for quick repair applications. CLR 1190 / CLH 6830

  11. CLR 1220 / CLH 6858

    5 min. gel general purpose adhesive. A two component, five minute epoxy system with optical clarity and high strength for quick repair applications. CLR 1220 / CLH 6858

  12. CLR 1296 / XHD 1303

    A low viscosity, aluminum filled, room temperature gelling casting system. Product has excellent surface reproduction and high strength. This system is recommended for use with aluminum shot for large mass casting. The product may be cast up to 2 inches in depth. CLR 1296 / XHD 1303

  13. CLR 1299 / CLH 6330

    General Purpose Aluminum. An aluminum filled, low viscosity, room temperature gelling, casting system. The product has excellent surface reproduction, and high strength. This system is recommended for use with aluminum shot for large mass casting. CLR 1299 / CLH 6330

  14. CLR 1299 / XHD 1303

    General Purpose Aluminum. An aluminum filled, low viscosity, room temperature gelling, casting system. The product has excellent surface reproduction, and high strength. This system is recommended for use with aluminum shot for large mass casting. CLR 1299 / XHD 1303

  15. CLR 1396 / CLH 6930

    Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930

  16. CLR 1796 / CLH 6580

    UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580

  17. CLS 9600

    High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600

  18. CLS 9611

    A low viscosity, single component, epoxy potting and encapsulating compound. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL 94-HB flammability requirements. Heat Cure Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. CLS 9611

  19. CLS 9616

    Heat Cure. Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. Low viscosity. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL94-HB flammability requirements. CLS 9616

  20. XR 52092 / XH 62093

    1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093

Results 1 - 20 of 22

Filters